In 2018, hengniu company started construction
Release time:
2018-02-02 10:12
Source:
Start! Start! I wish hengniu company a good start, prosperous business and rolling financial resources in 2018.
Let's roll up our sleeves and work hard together. Happiness is a struggle.
Related News
Where is the motorcycle oil pump located
The oil pump for the ride is usually installed in the right crankcase body, and can only be seen by removing the magnetic motor, the right cover of the crankcase, etc. The oil pump usually rarely malfunctions.
The difference between motorcycle crankshaft teeth and timing teeth
How to install the camshaft on a motorcycle requires removing the cylinder head, cylinder block, magneto side cover, and magneto to replace it. Moreover, the camshaft and timing teeth need to be replaced simultaneously, and the crankshaft timing teeth also involve special tools and alignment.
What will happen if the shift fork is broken
If the shift fork is damaged, it may cause gear loss, jumping, and difficulty changing gears; Due to damage to the shift fork, the transmission is unable to shift the synchronizer to the engaged position, resulting in the synchronizer not being able to mesh perfectly with the engagement sleeve.
Manifestation of Damaged Gears in Motorcycle Gearboxes
The gears inside the motorcycle gearbox are not easily damaged, and once damaged, the main manifestations are the following
The filter accuracy of oil filter is within 10 μ～ fifteen μ Its function is to remove impurities in the oil and protect the normal operation of the bearing and rotor. If the oil filter is blocked, it may cause insufficient fuel injection, affect the service life of the main engine bearing, increase the exhaust temperature of the engine head or even shut down.
Auto parts industry digital economy innovation and Development Forum "quenches thirst"
"What we used to do was office automation, and we really didn't understand the industrial Internet. Now we understand it a little bit." "look at what Xuyang did, and we'll learn from it later"...