Manifestation of Damaged Gears in Motorcycle Gearboxes
The gears inside the motorcycle gearbox are not easily damaged, and once damaged, the main manifestations are the following:
1. The gearbox is not working properly, and it stops when driving on the road.
2. Due to damage to the gears of the gearbox, the noise caused by friction during vehicle operation is particularly loud.
3. Damage to one gear can affect the integrity of other gears.
4. It is difficult or impossible to shift gears when the vehicle is in gear.
5. Long term driving of vehicles can produce many odors.
What are the reasons for gear damage in motorcycle transmissions?
1. It is possible that there is a problem with the quality of the motorcycle gears themselves.
2. Caused by motorcycle driver's operational error.
3. The most likely cause is a lack of oil in the gearbox, resulting in a lack of lubrication between these gears.
The oil pump for the ride is usually installed in the right crankcase body, and can only be seen by removing the magnetic motor, the right cover of the crankcase, etc. The oil pump usually rarely malfunctions.
How to install the camshaft on a motorcycle requires removing the cylinder head, cylinder block, magneto side cover, and magneto to replace it. Moreover, the camshaft and timing teeth need to be replaced simultaneously, and the crankshaft timing teeth also involve special tools and alignment.
If the shift fork is damaged, it may cause gear loss, jumping, and difficulty changing gears; Due to damage to the shift fork, the transmission is unable to shift the synchronizer to the engaged position, resulting in the synchronizer not being able to mesh perfectly with the engagement sleeve.
The gears inside the motorcycle gearbox are not easily damaged, and once damaged, the main manifestations are the following
The filter accuracy of oil filter is within 10 μ～ fifteen μ Its function is to remove impurities in the oil and protect the normal operation of the bearing and rotor. If the oil filter is blocked, it may cause insufficient fuel injection, affect the service life of the main engine bearing, increase the exhaust temperature of the engine head or even shut down.
"What we used to do was office automation, and we really didn't understand the industrial Internet. Now we understand it a little bit." "look at what Xuyang did, and we'll learn from it later"...