HOME
ABOUT
Profile
Honor
Culture
Development
Tteam
Organizational
WORKSHOP
Die casting workshop
Machine shop
Machining Center Workshop
Advantage
HONOR
PRODUCT
Auto parts
Motorcycle oil pumps
Motorcycle water pump
General accessories
NEWS
Media focus
Industry news
Company news
FEEDBACK
CONTACT
Where is the motorcycle oil pump located
The oil pump for the ride is usually installed in the right crankcase body, and can only be seen by removing the magnetic motor, the right cover of the crankcase, etc. The oil pump usually rarely malfunctions.
18
2023
/
09
The difference between motorcycle crankshaft teeth and timing teeth
How to install the camshaft on a motorcycle requires removing the cylinder head, cylinder block, magneto side cover, and magneto to replace it. Moreover, the camshaft and timing teeth need to be replaced simultaneously, and the crankshaft timing teeth also involve special tools and alignment.
What will happen if the shift fork is broken
If the shift fork is damaged, it may cause gear loss, jumping, and difficulty changing gears; Due to damage to the shift fork, the transmission is unable to shift the synchronizer to the engaged position, resulting in the synchronizer not being able to mesh perfectly with the engagement sleeve.
Manifestation of Damaged Gears in Motorcycle Gearboxes
The gears inside the motorcycle gearbox are not easily damaged, and once damaged, the main manifestations are the following
Maintenance of oil filter
The filter accuracy of oil filter is within 10 μ~ fifteen μ Its function is to remove impurities in the oil and protect the normal operation of the bearing and rotor. If the oil filter is blocked, it may cause insufficient fuel injection, affect the service life of the main engine bearing, increase the exhaust temperature of the engine head or even shut down.
2022
08
Auto parts industry digital economy innovation and Development Forum "quenches thirst"
"What we used to do was office automation, and we really didn't understand the industrial Internet. Now we understand it a little bit." "look at what Xuyang did, and we'll learn from it later"...
Why use variable displacement oil pump?
When the engine speed gradually increases, the pump oil volume and pressure of the oil pump will increase with the increase of the speed. After the pump oil volume and pressure meet the lubrication requirements, the continuous increase will consume more engine power.
What are the symptoms of the broken oil pump?
Once the oil pump is damaged, the oil pressure cannot be established, resulting in poor lubrication of the engine, which will not only affect the power performance and fuel economy of the whole vehicle